Skip to content

Bowstring Truss

A tied-arch truss with a bowed compression top chord, straight tension bottom chord, and connecting web that contains horizontal thrust across a clear span.

Version
v1 · 2026-09-28 · History
Domain-specific #
8256
Domain group
Applied Sciences & Engineering
Origin domain
Engineering & Design (beyond software)
Subdomains
Structural Engineering, Truss and Arch Structures → Engineering & Design (beyond software)
Aliases
Bowstring arch truss, Bowstring trussed arch

Core Idea

The bowstring truss combines arch and truss action. Gravity loads move through a curved or polygonal upper chord in compression, a straight lower tie in tension, and web members that transfer forces between them.

Because the tie contains thrust, supports can carry mainly vertical reactions. Long spans are economical, but connection integrity, tie continuity, top-chord buckling, corrosion/decay, fatigue, and lateral bracing govern real capacity.

How would you explain it like I'm…

Bow-and-String Bridge

A bowstring truss looks like an archer's bow. The curved top gets squeezed by the weight on it, the straight bottom is pulled tight like the bow's string, and little sticks in between share the push and pull. Because the string holds the bow's ends together, the walls holding it up mostly just have to hold it up, not keep it from spreading.

Arch Held by a String

A bowstring truss is a frame used to hold up roofs and bridges, shaped like a bow with its string. The curved top part, called the top chord, is squeezed (compression) by the weight it carries. The straight bottom part, called the tie, is pulled (tension) and keeps the ends of the curve from spreading apart. Diagonal and upright pieces in between pass forces between the top and bottom. Because the tie holds in the outward push, the supports mostly carry weight straight down. It can span long distances cheaply, but it only stays strong if its joints, tie, and bracing stay in good shape.

Tied-Arch Truss

A bowstring truss combines arch action and truss action. Gravity loads travel through a curved or polygonal upper chord, which is in compression like an arch, while a straight lower chord acts as a tie in tension. Web members between the chords transfer forces from one to the other. An arch alone pushes outward on its supports; here the tie contains that thrust, so the supports mainly receive vertical reactions. This makes long spans economical. In practice, capacity is governed by connection integrity, continuity of the tie, buckling of the compressed top chord, corrosion or decay, fatigue, and lateral bracing.

 

The bowstring truss is a structural form that couples arch and truss behavior. Gravity loads are carried by a curved or polygonal top chord acting in compression, a straight bottom chord acting as a tension tie, and web members that transfer forces between the two. The horizontal thrust that an arch would exert on its abutments is resisted internally by the tie, so the supports carry predominantly vertical reactions and do not need to resist large horizontal forces. This efficient load path makes the form economical for long spans. Real capacity, however, is often governed not by the idealized member forces but by connection integrity, tie continuity (a broken tie releases the thrust), buckling of the compression chord, corrosion or decay of members, fatigue under repeated loading, and adequate lateral bracing against out-of-plane instability.

Scope of Application

  • Long-span roofs. Creates unobstructed interiors.
  • Bridges. Uses tied-arch/truss load paths.
  • Historic structures. Appears in timber and steel construction.
  • Structural assessment. Checks ties, joints, buckling, and bracing.

Clarity

State geometry and panelization, materials, member sections, connection assumptions, tie continuity, support conditions, gravity/environmental loads, lateral bracing, imperfections, analysis model, deterioration, redundancy, and code basis. Inclusion test: Require an arched compression chord, straight structural tension tie, triangulated/web connection, and a coherent tied-arch/truss load path. Exclusion test: Exclude an untied arch, ordinary curved beam, parallel-chord truss, and decorative bow roof with nonstructural lower member. Nearest boundary: A tied arch may use a solid arch and hangers; a bowstring truss resolves the curved chord through a trussed web and panelized action. Exit condition: The classification fails if the lower chord cannot carry thrust tension or the web does not connect the chords structurally. Common misclassifications: It is not an untied arch. It is not a curved beam alone. It is not a parallel-chord truss. A decorative lower chord is not a structural tie. Nearest named distinctions: Tied arch: Is broader and may lack trussed web. Through arch: Describes deck position, not necessarily bowstring action. Parallel-chord truss: Has no bowed top chord. Curved beam: Carries bending rather than ideal axial truss action.

Manages Complexity

The form converts arch thrust into internal tie tension, trading massive abutments for demanding slender members and connections.

Abstract Reasoning

  1. Trace load from deck/roof into web.
  2. Resolve compression and tie tension.
  3. Check connections and support assumptions.
  4. Assess in-plane strength and lateral stability.
  5. Inspect deterioration and model uncertainty.

Knowledge Transfer

A design transfers only with matching span, rise, panel layout, material, joints, bracing, loads, support movement, and code assumptions.

Relationships to Other Abstractions

Local relationship map for Bowstring TrussParents appear above the current abstraction, mutual partners to the right, and children below. Node labels state whether each abstraction is prime or domain-specific; colors identify relation types.Bowstring TrussDOMAINDomain-specific abstraction: Truss — is a kind ofTrussDOMAIN

Current abstraction Bowstring Truss Domain-specific

Parents (1) — more general patterns this builds on

  • Bowstring Truss is a kind of Truss Domain-specific

    Bowstring Truss is a strict kind of Truss: it is a tied-arch truss with bowed compression chord, tension tie, and connecting web.

Hierarchy path (1) — routes to 1 parentless root

Neighborhood in Abstraction Space

Bowstring Truss sits in a moderately populated region (46th percentile for distinctiveness): it has near-neighbors but no dense thicket of look-alikes.

Family — Structural Mechanics & Materials (19 abstractions)

Nearest neighbors

Computed from structural-signature embeddings · 2026-10-08