Fatigue of Materials¶
Suresh, S. (1998). Fatigue of Materials. Cambridge University Press.
Cited by¶
2 citations across 2 artifacts.
Each citation links to the sentence it supports in the citing article.
Primes¶
- Fold
- The fatigue failure mode is the diagnostic payoff: bend the same line back and forth a few times — as anyone who has snapped a paperclip knows — and the metal work-hardens and fractures at that hinge.
This sourceCanonical reference on fatigue: repeated bending at a hinge work-hardens and accumulates damage until fracture at the recurring location.
Supported in partVerified against the publisher's abstract
Suresh's abstract establishes fatigue as cyclic deformation, crack initiation and crack growth in metals, backing the fatigue frame but not the claim's work-hardening or hinge-localized fracture clause.
“The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects.”
- The fatigue failure mode is the diagnostic payoff: bend the same line back and forth a few times — as anyone who has snapped a paperclip knows — and the metal work-hardens and fractures at that hinge.
- Temporal Decay and Degradation
- The core tension is between the irreversibility of time and use (once materials degrade, restoration is costly or impossible) and the possibility of maintenance interventions (detection, repair, refresh) that temporarily arrest or reverse degradation, a four-stage progression rigorously characterized in fatigue contexts by Suresh (1998).
This sourceCanonical text on fatigue: rigorously develops the four-stage progression from initial defect-free state through crack initiation, stable crack growth, and final fracture, with quantitative degradation laws that map to the prime's structural signature.
Supported in partVerified against the publisher's abstract
Suresh's own abstract confirms the book covers cyclic deformation, crack initiation and crack growth in fatigue, but it states no four-stage progression and no quantitative degradation laws.
“The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects.”
- The core tension is between the irreversibility of time and use (once materials degrade, restoration is costly or impossible) and the possibility of maintenance interventions (detection, repair, refresh) that temporarily arrest or reverse degradation, a four-stage progression rigorously characterized in fatigue contexts by Suresh (1998).
Verification¶
Does it exist? Not checked yet. This entry carries no identifier to resolve. It was extracted from the citation as written in the article, normalized, and deduplicated against the rest of the registry.
Does it back the claim? Read against the text for 2 of 2 citations: 2 supported in part. Each verdict is shown under its citation below, with what in the work backs the sentence.
Support is checked per citation rather than per work — the same source can be cited soundly in one article and wrongly in another. Per-citation recording began recently, so a citation with no recorded check is a gap in the record rather than evidence it went unchecked.
See how references were verified.
Registry ID ref:9d0d991cb585 · see in the full table